*UL Pending

CO2 System

Carbon Dioxide Gas

Under normal atmospheric temperature and pressures, carbon dioxide exists as a colorless, odorless gas which is about 1.5 times heavier than air. Carbon dioxide will not burn or support combustion and will not sustain life. When confined within a suitable pressure vessel and depending on temperature and pressure conditions, carbon dioxide can exist in any of three stages of matter; solid, liquid and gas.

High pressure CO2 Extinguishing system is used to protect the Rotating Electrical Equipment like Gas turbines, Generators and where water based system cannot be used such as Switchgear room, Relay room, Computer room and Electrical Room. The CO2 is stored as liquid, under pressure. When a system is activated, the liquid CO2 flows through discharge pipework to specially designed nozzles. Fire is extinguished by reducing the oxygen level in the risk area to the point where combustion cannot be sustained. Cooling is a secondary action of the agent; this feature is used in local applications where the liquid phase of the discharge is applied directly to the fire and risk materials.


High Pressure Carbon Dioxide System:

High pressure CO2 system is a specialized fire extinguishing system designed to maintain the carbon dioxide supply at 21º C and 850 psig in strength alloy steel cylinders. The cylinders contain the CO2 required to protect the largest single hazard. On large hazards where several cylinders are required, a manifold is used to connect each cylinder by means of flexible hoses and check valves. Cylinder valves control the CO2 flow to the hazard through properly sized pipe, terminating in nozzles that apply the CO2. Flow rate is controlled by nozzle orifices as well as pipe sizes. The cylinder master valves are electronically operated and the slave valves are pressure actuated. The master valves can be automatically and/or manually operated.


CO2 Extinguishing System Most Ideal For Protecting:

  • Paint and varnish manufacturing and processing areas.
  • Powder coating and Painting boots.
  • Transformers and substations.
  • Rolling mills and Turbines.
  • False Floors and cable shafts.
  • Engine test benches and SHIP Engine Room / compartments.
  • Printing machines.

In order to acces the technical data sheet section, pls Register