AFFF Solutions

In-house manufactured AFFF Solutions


ARMOUR 1%

An internationally accredited range of Aqueous Film Forming Foams AFFF Concentrates designed for fast fire extinguishment of Class B hydrocarbon fuels such as crude oil, gasoline and fuel oil. Formulated for use with either fresh or seawater. Not suitable for use on fuels which are polar solvents and water miscible such as alcohols, ketones, aldehydes and ethers.

  • UL Listed by Underwriters Laboratory in accordance with (UL162) for 1%, Foam Liquid Concentrates
  • Suitable for use with fresh or salt water
  • Excellent wetting characteristic when used in combating Class “A” Fuel Fire
  • Suitable for use with foam chambers, aspirating & non-aspirating sprinklers, spray nozzles, water fog nozzles & foam makers
  • Suitable for use with following proportioning equipment like inline inductors (fixed or portable) bladder tank balanced proportioning skid around the pump proportioners, handling aspirating nozzles with fixed inductor & pickup tube.
  • Suitable for storage in fiberglass, HDPE or stainless steel (type 304L or 316L)
  • 1% AFFF is not compatible with galvanized pipe or fittings in an undiluted form
  • Compatible for use in all proportions with other extinguishing ABC and BC fire fighting powders


ARMOUR 3%

An internationally accredited range of Aqueous Film Forming Foams AFFF Concentrates designed for fast fire extinguishment of Class B hydrocarbon fuels such as crude oil, gasoline and fuel oil. Formulated for use with either fresh or seawater. Not suitable for use on fuels which are polar solvents and water miscible such as alcohols, ketones, aldehydes and ethers.

  • UL Listed by Underwriters Laboratory in accordance with (UL162) for 3%, Foam Liquid Concentrates
  • Suitable for use with fresh or salt water
  • Excellent wetting characteristic when used in combating Class “A” Fuel Fire
  • Suitable for use with foam chambers, aspirating & non-aspirating sprinklers, spray nozzles, water fog nozzles & foam makers
  • Suitable for use with following proportioning equipment like inline inductors (fixed or portable) bladder tank balanced proportioning skid around the pump proportioners, handling aspirating nozzles with fixed inductor & pickup tube.
  • Suitable for storage in fiberglass, HDPE or stainless steel (type 304L or 316L)
  • 3% AFFF is not compatible with galvanized pipe or fittings in an undiluted form
  • Compatible for use in all proportions with other extinguishing ABC and BC fire fighting powders


TRAINING FOAM CONCENTRATE 3%

Designed to simulate the foaming performance of an AFFF with either fresh or salt water, but without the environmental impact of an AFFF. Not suitable for use as a fire fighting foam concentrate. Fluorosurfactant free synthetic base formulation Readily biodegradable with low toxicity to marine life For use in fire training and system calibration wherever a foaming alternative to a 3% AFFF is required. Ideal for use in areas where regular fire training is critical, such as: Offshore platforms and helidecks. Petrochemical refining, processing and storage facilities Marine terminals, power stations and road / rail loading racks Rapid Intervention Vehicles and aircraft hangar systems Produced training foams can also be used as wetting agents for combating Class A fires (i.e.tyres, paper, wood) and for providing a vapour suppression blanket on hydrocarbon spills. 3% Training Foam (Synthetic) concentrate is readily proportioned with the following equipment:

  • In-line inductors (fixed or portable
  • Balanced pressure variable flow proportioners
  • Around the pump proportioners
  • Bladder tank Balanced Pressure proportioning skid
  • Handline, aspirating nozzles with fixed inductor pickup tube

In order to acces the technical data sheet section, pls Register